SKYRC AC/DC Multi Chemistry Balance Charger E6650

The SKYRC AC/DC Multi Chemistry Balance Charger E6650 is compatible with 99% of Battery's on the market.The E6650 can can operate on 12v (Car battery) and 240v mains power. You can set up the upper limit of the charging current when charging your NiCd or NiMH battery and balance each individual cell when charging your lipo batterys

Features

• Internal independent lithium battery balancer
• e6650 employs an individual-cell-voltage balancer. It isn’t necessary to connect an external balancer for balance charging.
• Balancing individual cells battery discharging
• During the process of discharging, e6650 can monitor and balance each cell of the battery individually. Error message will be indicated and the process will be ended automatically if the voltage of any single one cell is abnormal.
• Adaptable to various type of lithium battery
• e6650 is adaptable to various types of Lithium batteries, such as Li-ion, LiPo and the new LiFe series of batteries.
• Fast and storage mode of lithium battery
• Purposes to charge Lithium battery varies, ‘fast’ charge reduce the duration of charging, whereas ‘store’ state can control the final voltage of your battery, so as to store for a long time and
• protect useful time of the battery.
• Maximum safety
• Delta-peak sensitivity: The automatic charge termination program based on the principle of the Delta-peak voltage detection. When the battery's voltage exceeds the threshold, the process will be terminated automatically.
• Automatic charging current limit
• You can set up the upper limit of the charging current when charging your NiCd or NiMH battery; it is useful for the NiMH battery of low impedance and capacity in the 'AUTO' charging mode.
• Capacity limit
• The charging capacity is always calculated as the charging current multiplied by time. If the charging capacity exceeds the limit, the process will be terminated automatically when you set the maximum value.
• Temperature threshold*
• The battery’s internal chemical reaction will cause the temperature of the battery to rise. If the temperature limit is reached, the process will be terminated. * This function is available by connecting optional temperature probe, which is not included in our package.
• Processing time limit:
• You can also limit the maximum process time to avoid any possible defect.
• Input power monitoring
• To protect the car battery used as DC input power from being damaged, its voltage keeps being monitored. If it drops below the lower limit, the process will be end automatically.
• Data store/load
• The maximum five batteries’ data can be stored for users’ convenience. You can keep the data pertaining to program setting of the battery of continuous charging or discharging. Users can call out these data at any time without any special program setting.
• Cyclic charging/discharging
• 1 to 5 cyclic and continuous process of charge>discharge or discharge>charge is operable for battery refreshing and Balancing to stimulate the battery's activity.